Kendall Amateur Radio Society


Do It Yourself

Air Dipole by K4OCE The use of insulators to separate segments of a dipole, and then use alligator clips to connect the segments from low to high.
An Easy to Build Ham Clock This is a "how to build" presentation by Don Udel, KI5AIU.
Build a Hi-Performance Quad Bob Rosier-K4OCE, shows how to build a high performance Cubical Quad.
Build Your Own Battery Pack Don Udel (KIAIU) shows you how.
Hotspots Interested in digital hotspots?  Start here.
Field Strength Meter How to build a Field Strength Meter and why you want one.  Step by step instructions from K4OCE,  Mr. QRP.
Nano Low Cost VNA N7RF tells you about a Vector Network Analyzer.
Remote Field Strength Meter K4OCE tells you about a remote field strength meter.
Using a SDR to track planes ADS-B is GPS based reporting FAA uses to track airplanes for air traffic control.  You can watch the traffic with this.
WSJT-X on a Pi 3 This presentation tells how to install WSJT-X on a Raspberry Pi 3 by Joe Kohler, W5QLF.
Yaesu Jeep Installation This presentation shows how KARS member Gavin, KI5MCD installed his Yaesu FT-857D in his Jeep Wrangler.